Intercooler and Evaporator Heater Factory Custom Core

Intercooler and Evaporator Heater Factory Custom Core

                      Micro channel parallel circulation radiator expert producer

The condenser-a part of the air conditioning circuit-is integrated into the engine cooling module, the place it is utilised to awesome down and condense the compressed, gaseous refrigerant from the compressor. We generate brazed, flat tube condensers that provide large functionality in spite of their compact and lightweight style. They make certain quick cooling of the passenger compartment thanks to ideal matching of heat transfer and force drop on equally the coolant and the air aspect.

The condenser is a heat exchanger in a mobile A/C technique. Today, condensers are typically made of aluminum, but in the previous, some have been created of copper/brass. Condensers seem quite significantly like radiators, just a minor thinner, and since they also count on air flowing by means of them, are normally situated in front of the radiator.
Like radiators and evaporators, condensers are also created as a sequence of tubes with fins about them. its  job is to launch heat. A lot more exclusively, to launch the warmth the refrigerant absorbed although it was flowing by means of the evaporator, very a lot the identical way the radiator releases the heat from motor coolant that the coolant absorbed although it was flowing by means of the motor. The refrigerant enters the condenser as a high-stress vapor, but as it flows by way of the condenser and cools, it turns back into a cooler substantial-force liquid.

Merchandise functions
1 adopt low height fins and multiple flat pipes to increase the heat dissipation area and improve the heat dissipation performance.
2 fin special treatment to enhance lodging resistance and maintain the tidiness of the products’ appearance 
3 powder coating on the products can enhance corrosion resistance and improve product life cycle.
4 none- argon arc welding solder products look different.
5 every product’s pressure is maintained by using nitrogen so the product is free from leakage at 100% before it leaves the factory

Business Gain
one. Generic products are supposed to be manufactured strictly according to the installation standard of the original factory, in this way to ensure the accurate installation for the users.
two. This special design for the pin not only enhances its lodging resistance,ensure the visual appearance tidy but also reduces the air blockage chance, it also allows more heat dissipation area to improve heat transfer performance. In that way, the air conditioning system can achieve its expected function more efficiently.
3. Part of the products uses galvanised microchannel flat tube as material or adopt the powder coating treatment, in order to improve products’ corrosion resistance and prolong the service life.
four. By machining core into different thickness and wave distance and changing the amount of holes in flat tube,we can improve the heat dissipation efficiency of condenser of the product, lower down the system compression power, save fuel and improve economic efficiency.
5.CZPTy product is double checked and a pressure-holding device is installed to ensure that every product is 100% leak-free before it leaves the factory.
6. The company with a complete production chain, is focused on the developing new products, and keeping tracking of products to ensure the timeliness of all product supply, and also enhance the flexibility of enterprise operation.
seven.Only when we have an independent team with high efficiency can we satisfy CZPT demands.  

Prolonged time period enterprise is dependent on our dependable providers, rapidly react and our professional expertise to Car AC. We are going to become your associate, not just your supplier.
1.CAD Drawing, and mould layout base on your sample
2.Mould test and sample verification prior to mass generation.
3.CZPTers of numerous transport lines.
four.competitive freight delivers and one particular-cease provider on clearing, shipping and delivery troubles.

Q1. Are you a manufacturing unit or trading firm? A: we are a self -possess manufacturing unit, we give 1-stop service for our customers, from spare parts to condenser, from specialized sales to shipping and to soon after-sales, so as to save the value for consumer, control the high quality and guide time, give the ideal solutions
Q2: In which is your manufacturing facility situated? How can I pay a visit to there? A: Our factory is positioned in  HangCZPT, Shan dong, China.
The nearest airport is ZheJiang Yaoqiang airport or HangCZPT Liuting airport.
Q3. What is the manufacturing time for new molds and mass generation? A: 7-10 days to construct the new moulds, mass production requires all around twenty-25days for one particular 20gp,twenty five-30days for one particular 40hq, can process urgently if need to have.
This fall: What is the payment phrases? A: Telegraphic Transfer (T/T) and Letter of Credit (L/C).
Q5: Can you deliver me samples? A: Indeed, Samples are for free of charge, and freight is on your aspect.


Intercooler and Evaporator Heater Factory Custom Core