PTFE Coated Fiberglass Mesh Conveyor Belt

PTFE Coated Fiberglass Mesh Conveyor Belt

Specs of ptfe PTFE coated fiberglass mesh conveyor belt:

1. PTFE Mesh CZPT Belt
2. Heat resistant, Microwave safe
3. High drying efficiency
four. Non-toxic & non-stick
5. Wonderful tensile toughness

Description of ptfe coated fiberglass mesh conveyor belt:

PTFE Coated Fiberglass ptfe coated fiberglass mesh conveyor belt is ideally suited for conveying merchandise in extremely effective air distribution techniques allowing optimised humidity elimination to get spot and is commonly utilised inside of extremely violet and infra crimson dryer models
The open region makes it possible for maximum air stream optimising drying occasions even though its excessive properties make it a organic choice for dryer manufactures.

Purposes of ptfe coated fiberglass mesh conveyor belt:

PTFE Coated Fiberglass Mesh CZPT Belts are utilised in programs such as the drying of printed products for instance Stage of screen stands, T-shirts, glass and mass created paper prints. Print dryers typically opt for Extremely violet, Infra red or hot air as the heat resource to dry.

Other applications range from the drying of cereals, non woven’s, charcoal interlinings, carpet & carpet tiles, printed circuit boards and shrink-wrap tunnels but to title a couple of.

Attributes & Positive aspects of ptfe coated fiberglass mesh conveyor belt:

PTFE open mesh conveyor belting is mild weight and cost powerful for that reason is easy to manage and considerably less high-priced than wire options that can be difficult to replace. Frequently equipped with a metallic clipper kind fastener these fashion of belts can effortlessly be eliminated and changed for that reason minimising downtime and saving funds. This materials can be provided in carbon loaded black consequently providing antistatic qualities.

Material Qualities

· Temperature resistance: -70° C up to furthermore 260° C

· Chemical Inertness

· Ultraviolet, Infra-pink, microwave, radio frequency resistance

· Non-Adhere surface area

· Light-weight and strength performance for economical procedure

Additional Information

4×4 open up location mesh is CZPT in widths up to 4000mm broad and can be provided at any length required. In addition movie, glass or kevlar can be applied as edge reinforcement relying of the setting it will be utilised in. There are various approaches of signing up for screen-printing belts nonetheless the metallic clipper or spiral varieties are a lot more common

Design Mesh Dimensions Material Thickness Fat Temp Resistance Max Width Tensile Toughness
YS-6001 1x1mm   fiberglass .5mm 370g/m² -70-320C 4000mm 310/290N/cm
YS-6002 2x2mm fiberglass .7mm 450g/m² -70-320C 4000mm 350/310N/cm
YS-6003 4x4mm fiberglass one.0mm 400g/m² -70-320C 4000mm 390/320N/cm
YS-6004 4x4mm fiberglass one.0mm 450g/m² -70-320C 4000mm 390/320N/cm
YS-6007 4x4mm fiberglass
+kevlar
1.2mm 600g/m² -70-320C 4000mm 895/370N/cm
YS-6008 4x4mm fiberglass 1.0mm 500g/m² -70-320C 4000mm 395/370N/cm
YS-6571 4x4mm Kevlar one.0mm 500g/m² -70-320C 4000mm 900/600N/cm
YS-6012 4x4mm fiberglass 1.0mm 550g/m² -70-320C 4000mm 395/370N/cm
YS-6013 10x10mm fiberglass 1.2mm 450g/m² -70-320C 4000mm 360/300N/cm
YS-6014 .5x1mm fiberglass .5mm 420g/m² -70-320C 4000mm 310/290N/cm
YS-6015 2×2.5mm fiberglass .9mm 600g/m² -70-320C 3000mm 390/320N/cm

PTFE Coated Fiberglass Mesh Conveyor Belt