Filling and Seaming Machine for Pet Can

Filling and Seaming Machine for Pet Can

This equipment is suited for the filling and seaming of carbonated soft beverages, beer, and so forth. The generation potential is 50-200 cans per moment.
 
The whole machine can be divided into two positions, filling and seaming, filling is utilised for pressure filling, liquid degree is managed by liquid degree filling basic principle, and the material temperature is appropriate for low-temperature filling. The seal adopts a double – wheel progressive seal.
 

 
The concepts:
Following the empty cans go the conveyor and separated by enter-in cans screw,by the enter-in dialing plate driving enter into the cans-assistance seat,then the cans-help rise and move to the change valve placement, and make the first exhaust,and the cans-assist seat carry on to rise to the filling valve seal.And shut the gasoline-guide pipe instantly,open the exhaust close,make the 2nd exhaust then shut the exhaust swap quickly.The filling barrel carry on rotating a particular angle to the second switch valve placement, entirely open up the filling valve,the content stream into the cans until full.
 
Soon after the filling process, the filling barrel ratates to the exhaust valve and get rid of extra pressure, the cans-assist plate goes down to split the cans away from the filling valve.And then the cans will be sent to the cap falling-down gadget by the hook chain. Following the cap slipping-down gadget detect the cans, it falls cap down, and deliver the can to the seaming device. Then the cans supported by the plate and are sealed. Finally it is shipped by the conveyor.
 
 
The Attributes:
1.The sealing device head seal uses the biaxial composition: the feed amount of the initial and next roller can be adjusted and managed individually.
 
two.The secondary exhaust composition of the filling device: the 2nd exhaust of the filling equipment, lessen the oxygen material in the tank and lengthen the shelf life
 
three.Weighty bearing extensively employed in this machine the imported bearings are employed in the crucial hefty loading region so that the services lifestyle and security can be extended.
 
4.High top quality elements: We use Siemens PLC, daida inverter, touch display screen, Yad solenoid valve and Omron proximity change.
 
5.Hassle-free Procedure: The generation pace can be modified on touch screen The device will instantly alarm when normal malfunctions takes place, and will also give the corresponding reasons. According to the severity of the malfunctions, PLC will choose whether to cease the device.
 6.The device has good appearance, stable procedure and lower sounds. It is the most perfect filling and seaming gear in China at present.

 

Filling and Seaming Machine for Pet Can